Cart is empty
An easy graphic changeover, cost effective and lightweight banner. The X frame itself is comprised of 4 poles which are held together when in use via a central hub.
When the stand is assembled, the graphic is attached by hooking the metal eyelets which are located in each corner of the print over the nodes on the X frame.
Because the print is not permanently attached to the frame it makes graphic changeover simple! You just need to order new prints for your existing stand. They will come supplied with eyelets and will be ready to use.
Size:800mm wide x 1800mm page size.
Resolution:We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.
Colour Mode:Supply artwork in CMYK mode only
Important Info:The eyelets are punched into the corners of the graphic approximately 25mm in from each edge, so make sure sure you keep any logo's or images you wish to be fully seen away from these areas.
Files types supported: Please save files as JPG, Tiff or PDF